Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - nijovcxm

Pages: [1] 2 3 ... 106
1
Chat / GateCycle.v5.32
« on: April 05, 2013, 09:53:28 pm »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Applied Flow Technology Arrow 3.0.2004.12.13
Psunami Water v1.0 3d
Cadpipe 2002 Commercial PIPE v7.0 for.AutoCAD
Elite Software Audit 7.02.35
IES QuickRWall 1.50.0009
Elite Software FIRE v6.0.189
PCA BEAM V2.0
AGA-3.Orifice.v6.01
WaterCad v6.5120n
Geodelft Watex v3.1.2.1
StormShed2G 7.0.0.10
DELFT GEOSYSTEMS Watex v3.1.2.1
DELFT GEOSYSTEMS MGeobase v2.9.4.3
DELFT GEOSYSTEMS GEFPlotTool v4.1.1.4
DELFT GEOSYSTEMS DGPlume v1.8.1.1
Piping Systems FluidFlow 2.34
IES QuickRFooting 1.00.0008
Watercom Drains v2006.04
PCA.BEAM.V1.51
Elite Software Ecoord v3.0.19
AAS MIDUSS V2.2
Elite Solfware HTOOLS v3.2.16
??ANSYS?(44)
??MoldFlow?(0)
??FLUENT?(30)
??MSC?(61)
??Other CFD?(203)
CivilFEM_with_ANSYS_13.0
ANSYS nCode DesignLife v14.0
ANSYS V14 FOR LINUX64
Ansys Products v14
Ansys Icepak 12.1
ANSYS CivilFEM 12
ANSYS CivilFEM 12 Win64
Ansys Products v12.1.1 LinX64
ANSYS PRODUCTS 12 Win32
SAFE TECHNOLOGY FE-SAFE 5.4
ANSYS PRODUCTS 12 WIN64
Ansys ICEM CFD 12
ANSYS ICEM CFD 12 WIN64
 
If you need it or anyelse, please email to: crdlink@hotmail.com

2
Chat / Forten.2000.v1.90.0d
« on: April 04, 2013, 09:04:04 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


INVENSYS.SimSci.Visual.Flow.v4.1
KAPPA Ecrin 4.02
KAPPA Saphir 3.2
Maptek Vulcan 7.0 SP4
Schlumberger Eclipse 2008.1
Schlumberger Eclipse 2007.1
Schlumberger Petrel 2007.1
Schlumberger PipeSIM 2007.1
Schlumberger Interactive Petrophysics 3.4
Schlumberger Merak Peep 2007.1
Schlumberger.Petrel.v2004
Schlumberger.PipeSIM.V2003.07.0141
Scandpower Petroleum Technology OLGA 5.3
olga.v5.2.1
PipeData PRO 7.2.12
PipeDrop.v1.2.3
Piping.Systems.FluidFlow.v2.34
CALSEP PVTSIM 17.3C
PVTsim 16.2
PVTsim 13.1
CMG SUITE 2008.10
CMG SUITE 2007.10
CMG SUITE 2004.11
GeoGraphix Discovery R2007.1
Micromine 10.0.5
NeuraLog 2008.05
NeuraMap 2008.05
NeuraSection 2008.05
NeuraView 2008.05
NeuraLog V2007.01
NeuraMap V2007.06
NeuraSection 2006.09
Pinnacle FracproPT 2007 v10.4.52
Plaxis Professional 8.5
Plaxis 3D Foundation 1.6
Plaxis.v8.2
Plaxis.v7.2.professioner
Plaxis.3D.Tunnel.v1.2
SMT Kingdom Suite 8.0
Accel.EDA.v14.0
 
If you need it or anyelse, please email to: crdlink@hotmail.com

3
Chat / Forte.Cynthesizer.v3.60.Linux
« on: April 04, 2013, 08:57:53 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Ansoft HFSS 11.2
Ansoft Designer And Nexxim 4.1.1
CMG 2008.1
Silvaco SIMUCAD Analog Mixed Signal 2008.09 Win
Silvaco SIMUCAD Analog Mixed Signal 2008.09 Linux
Silvaco SIMUCAD Analog Mixed Signal 2008.09 Linux64
Silvaco SIMUCAD Catalyst 2008.09 Linux
Silvaco SIMUCAD Catalyst 2008.09 Linux64
Silvaco SIMUCAD Characterization 2008.09 Linux
Silvaco SIMUCAD Characterization 2008.09 Linux64
Silvaco SIMUCAD Custom IC CAD 2008.09 Win (1CD
Silvaco TCAD 2008.09 Win
Wasp-Net 6.0.1
Green Hills MULTI for MIPS 4.2.1
Mician uWave Wizard 6.5.1.287
Agilent Electromagnetic Design System 2006B
Datamine Studio 3.0
CMG SUIT 2008.01
Candence SEV 4.1 Linux
Cadence TSI 6.1 Linux
Agilent IC-CAP 2008
sonnet suit pro 11.54
Vector Fields CONCERTO 6.0
Bentley Generative Components 8i XM 8.11.05.36
Bentley Map V8i XM 8.11.05.26
Bentley MicroStation 8i XM 8.11.05.17
Bentley Microstation Descartes 8i XM 8.11.05.25
Bentley Microstation Powerdraft 8i XM 8.11.05.17
Bentley Revit Plugin 8i XM 8.11.05.26
Bentley Structural 8i XM 8.11.05.25
AspenTech aspenONE Engineering Suite v7
ASPENTECH ASPEN SUITE 2006.5
ASPENTECH.ASPEN.ICARUS.V2006
ASPENTECH.ASPEN.ORION.V2006
ASPENTECH.Aspen.PIMS.v2006
ASPENTECH.Aspen.Engineering.Suite.v2004
ASPENTECH.HTFS.V2006
Aspen.ICARUS.Products.v12.0
Aspen.B-Jac.v12.0
Aspen.Plus.v11.1
 
If you need it or anyelse, please email to: crdlink@hotmail.com

4
Chat / Forsk.Atoll.3.1.x64
« on: April 04, 2013, 08:40:47 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


ADAPT Builder 2009 Build4
Zeland Product Suite 14.62
CAM350 10.1
Paradigm Interpret 2009
Schlumberger Cougar 2008.1
Fluent Icepak 4.4.8
Fluent Icepro 5.0
LEICA ERDAS IMAGINE 9.3
Tekla Structures 15.0 SR5 x64
Aldec Active HDL 8.2 With UPDAT3
GEOSOLVE Wallap 5.0.3
MagiCad 2008.11
CHEMSTATIONS CHEMCAD 6.2.0
TracePro 5.0.7
GMG GXII 4.0 Linux
GMG Gxii 4.02
GMG MESA 11.03
11-22Agilent GoldenGate 4.3.8 Linux
11-22Encom Discovery 11.0
11-22Encom Discover 3D 5.0
11-22Adapt Builder 2009 Build4 Win64
11-22ADAPT Builder 2009 Build4
Telelogic.SDL.and.TTCN.Suite.6.2
ETA DYNAFORM 5.7
Magama FineSim 2008.07 Linux
INTERCORR PredictPipe 3.0
INTERCORR Socrates 8.0
INTERCORR Socrates-B 3.0
VISTA_9.0
SEMCAD X 14.0
CSI Perform-3D 4.03
AVL Cruise 2009
Bentley RAM Advanse 9.5
AVL Fire 2009
Ansoft SIwave 4
Telelogic TAU 4.2
Erdas Leica PHOTOGRAMMETRY SUITE 9.3
Telelogic DOORS 8.3
ERDAS Imaging 9.3
Erdas ER Mapper 7.2
 
If you need it or anyelse, please email to: crdlink@hotmail.com

5
Chat / Forsk.Atoll.3.1.0.3730.x32
« on: April 04, 2013, 08:29:08 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Bentley RAM Elelments v8i 10.5
Bentley RAM Connection v8i 6.5
Bentley RAM Concept v8i 03.04
Bentley RAM Concept V8i 03.02.00.30
Bentley RAM Advanse 09.05
Bentley HAMMER v8i
Bentley CulvertMaster 03.03.00.04
Beicip-Franlab.Genex.4.0.3
AVL Fire 2009.0
AVL EXCITE Fatigue 5.4
AVL CRUISE 2010.0.2
AVL Cruise 2008.1
AVL Advisor 2004
Autoship 8.2
Aspen Technology aspenONE 7.2
Aquifertest 4.3
AquaChem 2010.1
Ansys CivilFem V12.0
Ansoft SIwave 5.0
Ansoft Simplorer 9.0
Ansoft Q3D Extractor 10.0
Ansoft PExprt 7.0
Ansoft Maxwell 14.0
Ansoft HFSS 13.0
Ansoft Designer and Nexxim 6.1
Synopsys Saber 2009.06 SP1 Win
AVL WorkSpace 2009.1
Mentor Graphics Calibre 2009.3_24 Linux
CATENA SIMetrix-Simplis 5.6
Agilent GodenGate 4.3.8

DELCAM EXCHANGE 6.1.20.05
ERDAS LPS 2010
ERDAS ER Mapper 2010
ERDAS IMAGINE 2010
Cadence spb 16.3 win
Rocscience Settle3D 5.0
Rocscience Swedge 5.0
FORMSYS MAXSURF Pro 13
Cadence spb 16.3 win
 
If you need it or anyelse, please email to: crdlink@hotmail.com

6
Chat / Fornux.PowerCalc.GX.v4.2
« on: April 04, 2013, 08:18:31 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


ORA.CODE.V.10.2
DNV SESAM 2008
Synopsys TCAD Sentaurus Lithography PWA 2009.12 Win
IMST Empire XCcel 5.5 Win/Linux/Linux64
Delcam Crispin Engineer 2011 R1 SP3
Delcam.Crispin.LastMaker.2011.R1.SP0
AVL Cruise 2010.1 Win
Novas Verdi 2011.01 Linux
Synopsys Star-RCXT 2010.12 SP2 Linux
Synopsys Formality 2010.12 SP2 Linux
Synopsys Core Synthesis Tools 2010.12 SP2 Linux
Ucamco Ucam 9.1.1
CoWare Processor Designer 2010.1.0
CSI Etabs 9.7.2
CSI PERFORM-3D 4.04
CSI Safe 12.3.1
GMI Caliper 2.0
GMI MorhrFracs 2.6
GMI WellCheck 2.5
Lambda TracePro 7.04 WIN32
COMSOL.MULTIPHYSICS.V4.1
Autodesk alias automotive 2012
Autodesk alias design 2012
Synopsys Certify 2011.3 Win
Materialise.SimPlant.Planner.v13.0
Materialise.SimPlant.Pro.v13.0
Materialise.SurgiCase.CMF.v5.0
Materialise.Magics.15.02
Materialise.Mimics.14.01
Materialise.3-Matic.v5.1
Fekete.FAST.Piper.7.3.0
Fekete.FAST.FieldNotes.5.1.1
Fekete.FAST.Evolution.1.2.2
Fekete.FAST.CBM.4.6.0
Infolytica.ElecNet.7.1.1
Synopsys.Synplify.FPGA.2011.03.win
VISTAGY.SyncroFIT.2009.SP1
VISTAGY.AeroSuite.2009.SP1
Silvaco SIMUCAD Analog Mixed Signal v2008.09 Win
Bentley RAM Structural System v8i 14.2
 
If you need it or anyelse, please email to: crdlink@hotmail.com

7
Chat / FORMZ.RENDERZONE.PLUS.V6.5.4
« on: April 04, 2013, 08:05:43 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Shell FRED 5.1
KBC SIM Suite 4.0 SP1
Materialise Mimics 14.12
Transvalor Solutions Forge 2009
Rocsience Phase2 8.0
PlanSwift Professional 9.0.17.8
Ansoft TPA 6.0 Win
Cype 2012c
Synopsys Synplify FPGA 2011.03 SP2 Win
Sperry INSITE 7.3
Polar Speedstack 2011
ORA LightTools 7.0.0
Microstran 8.21.110530
Lumerical MODE Solutions 5.0.3
Lumerical FDTD Solutions 7.5.4
Wind Loads on Structures 2005
Synopsys Saber 2011.03 Win
Sunrise Pipenet 1.50
Steel Water Pipe Design 2007
Bentley SewerGEMS 8i
Deltares.Systems.D-Pile.Group.5.1.1.4
Deltares.Systems.DGeoStability.10.1.1.4
Interactive.Petrophysics.3.6
GEO-SLOPE.GeoStudio.2007.v7.10
VR&D.Design.Studio.for.GENESIS.12.0
Delcam.PartMaker.2011
CoventorWare.2008.Linux
Ansoft.HFSS.13.0.Linux64
Altair.SimLAB.9.0
Altair.HyperWorks.v11.0.Linux64
Altair.HyperWorks.v11.0
Agilent.IC-CAP.2011.04.Win
AnsoftLinks.5.0
Agilent.SystemVue.2011.03.Win
Pinnacle.StimPT.2007.v10.4.73
Nemo.Outdoor.5.10.6
IES.QuickRWall.2.1.7
Forsk.Atoll.2.8
Neuralog.NeuraSection.2011.01
GEO-SLOPE.GeoStudio.2007.v7.17
 
If you need it or anyelse, please email to: crdlink@hotmail.com

8
Chat / FORMZ.RADIOZITY.V5.5
« on: April 04, 2013, 07:54:03 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Deltares.Systems.D-Settlement.9.1.1.6
RISA-2D 10.1
RISAConnection 1.1
RISASection 2.0
PLANIT.EDGECAM.V2011.R2
MISSLER_TOPSOLID_V2011_WIN32
LIGHTMAP_PICTURE_LIGHTS_FOR_HDR_LIGHT_STUDIO_PRO_V2.0
LIGHTMAP_HDR_LIGHT_STUDIO_PRO_V2.0
DGB.OpendTect.Commercial.v4.2.0c
AUTODESK SKETCHBOOK PRO V2011 SP2 Macos
AUTODESK SKETCHBOOK PRO V2011 SP2
LEAPSOFT CONSPLICE 1.2.2
Bentley LEAP RC-PIER V8i 09.00.00.53
Bentley LEAP GEOMATH V8i 09.00.00.08
Bentley LEAP CONSPAN Rating V8i 09.00.00.08
Bentley LEAP CONBOX V8i 09.00.00.45
Bentley LEAP Bridge V8i 09.00.00.08
CurveExpert 1.2.3
Irap Roxar RMS 2011 Win64
Synopsys Synplify FPGA 2011.09 Win
Synopsys Identify 2011.09 Win
AVL Workspace 2011
Artas SAM 6.1
AGI ODTK 6.1.0
S57W 6.22
Materialise SimPlant Pro 2011 v14.0
Materialise SimPlant Planner 2011 v14.0
Materialise SimPlant Master 2011 v14.0
Irap Roxar RMS 2010.01 Win64
Artas SAM 6.0
FFT Actran 11.1
CIMCOEdit 6.61007
ROXAR RMS 2011 Win32
RISAFoundation 3.1.1
RISAFloor 5.1.1
RISA-3D 9.1.1
NREC MAX-PAC 7.0.30
MyScript Stylus 3.2
Dimensional Foundation3D 5.0.0
CFturbo.9.0
 
If you need it or anyelse, please email to: crdlink@hotmail.com

9
Chat / Formtec.NCspeed.v6.1.1.2
« on: April 04, 2013, 07:43:56 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


STEINBICHLER
Steinbichler Cometplus v5.11
Steinbichler Cometinspect v2.0

Materialise
Materialise 3-Matic v6.1.1.0 Win32
Materialise 3-Matic v6.1.1.0 Win64
Materialise.Magics. Bijoux.13.1.8.01.Win32
Materialise Magics v13.0
Materialise Magics Tooling v5.1.1
Materialise Magics Tooling Expert v2.1.1 CD
Materialise Magics RP v16.0.3 Win32
Materialise.Magics.RP.v16.0.3.Win64
Materialise.Mimics.v10.0
 
Microkinetics MillMaster Pro for Windows v3.2.17 v2.3
Microkinetics TurnMaster Pro for Windows v2.3
Materialise.SurgiCase.Planner.v3.0
Materialise Simplant Planner v8.3

Floating Point Solutions
Floating Point Solutions Point Cloud v1.01

Datasqueeze
Datasqueeze v2.0.7
Datasqueeze v2.0.5 Linux
Datasqueeze v2.0.5 MAC

Esteco
Esteco.modeFRONTiER.v4.3.0 ALL OS
 
If you need it or anyelse, please email to: crdlink@hotmail.com

10
Chat / FORMSYS.MAXSURF.Pro.15
« on: April 04, 2013, 07:31:05 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:



Waterloo.Maple.8
Mathematica.Link.for.excel v2.2
Research.Mathematica.v7.0

Embarcadero.DBArtisan.v8.6.2.3952
Embarcadero.ERStudio.v8.0.3.6063
Embarcadero.Rapid.SQL.v7.6.2.3433
Flexlm SDK v7.2A
Functor.v2.9

Gambit.MIMIC.Simulator.Suite.v7.11
Gambit.MIMIC.Simulator.Suite.7.11.Linux
Gambit.MIMIC.Virtual.Lab.CCNA.1.11
Gambit.MIMIC.Virtual.Lab.CCNA.1.11.Linux

GraphingCalc v1.35
Design.Science.MathType.v6.6
MechCAD AceMoney v3.4.2
MLAB v1.0 datecode 20040609
Matrices Solver Platinum 2004 v1.0.0
MVSP v3.13n
Powersim Studio 2005 v6.00.3372.6
SAS.JMP.Statistical.Discovery.v10.0
SciFace.MuPAD.Pro.v4.02
Systat Systat v11.0
SigmaPlot 2002 v8.0
S-plus2000
S-Plus v6.2
IBM.SPSS.Sample.Power.v3.0.1
IBM.SPSS.Visualization.Designer.v1.0.3
SPSS Clementine v12.0 MultiLanguage
SPSS.v16.0.1
SPSS.v16.0.Linux
SPSS 15.0 FullCD and 15.0.1
SPSS TableCurve 2D v5.0
Thomas.Maienschein.pkMath.v06.19.07
 
If you need it or anyelse, please email to: crdlink@hotmail.com

11
Chat / FormatWorks.2007.SP1
« on: April 04, 2013, 07:07:50 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Analytical Graphics
Analytical.Graphics.STK.Pro.v8.11
Analytic Graphics STK ArcInc Basic Globe 4.0

MAK.Software.Suite.v4.0
MAK Data Logger v3.9A
MAK GateWay v4.1.1
MAK PVD v2.7
MAK RTI v2.2
MAK Stealth v5.2A
MAK VR-Forces v3.7
MAK VR-Link v3.9.1

OPTICORE
Opticore.Opus.Studio.v4.1

Engineous.Software
Isight.v9.0
Isight v7.0.10 for LiNUX
Isight-FD.v5.0 Win32_64

NavisWorks.JetStream.v5.2.3.MultiLanguage

GL-Studio v3.0.2
GL Studio v3.0

Virtual Prototypes
STAGE Scenario v5.0

Quantum3D
OpenGVS.v4.5

VPI
VAPS.Suite.v6.3
VAPS Simulike v6.3
VAPS Designdoc v6.3
VAPS Ccglite v6.3
Vaps XT 661 v1.0

CM-LABS
CMLabs.Vortex.Simulation.Toolkit.v3.0
 
EDS VIS ProDucts v4.1
EDS JACK v3.01

WorldToolkit Release 7.0

eNGENUITY Technologies
STAGE v4.2.0

Eingana
Eingana.v1.5.Multi

Ceetron ASA
Ceetron.GL.View.Inova.v8.2.3
 
533Soft.Box.Shot.Maker.v1.88C
Box.Shot.3D.v2.10.Working
Box.Shot.3D.v2.9.4.Mac.OSX
Box Vellum v5.0
Stephen Schmitt World Machine Pro v2.3

Deliverance Software
Deliverance Software Geoscape3d v1.2.0.16

VENTANA
CyberMotion.3D-Designer.v11.0.50.6.WinALL
Virtutech.Simics.v2.2.14
 
Virtutech.Simics.v2.2.14.Linux
3DVRi v2.2
VR-Platform.v3.0731

Terra Vista v3.0
 
If you need it or anyelse, please email to: crdlink@hotmail.com

12
Chat / Forma.4.55
« on: April 04, 2013, 06:58:32 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


NI-488.2.v2.3
NI.Analog.WaveForm.Editor.v1.2.1
NI.Circuit.Design.Suite (Multisim).v12.0
NI.Circuit.Design.Suite.Educational.v10.1
NI.Calibration.Executive.v3.2
NI.LabVIEW.Control.Design.Toolkit.v2.1.2
NI.Datafinder.Server.Edition.v2.1
NI.DAQmx.v8.9
NI.DIAdem.v11.1
NI.DIAdem.Insight.v2.09
NI.Digital.Waveform.Editor.v2.0
NI.DSP.Module.v1.0.for.NI.LabView.Embedded.Edition.v7.1.1
 
NI.ECU.Measurement.and.Calibration.Toolkit.v2.12
NI.LabWindows.CVI.FDS.v9.0
NI.LabWindows.CVI.PID.Toolkit.v2.1
NI.LabWindows.CVI.SQL.Toolkit.v2.1
NI.LabWindows CVI Real Time Module v9.0
NI.LabWindows.CVI.v8.01
NI.Lookout.v6.2
NI.Motion.v7.6
NI.Motion.Assistant.v2.3
NI.Modulation.Toolkit.for.LabVIEW.v3.1.REPACK
NI.Multisim.Analog.Devices.Edition.v10.0.1

NI.OPC.Servers.v1.0
NI.Real.Time.Execution.Trace.Toolkit.v2.0.2
NI.Requirements.Gateway.v1.1
NI.SoftMotion.Controller.v2.1
NI.SoftMotion.Development.Module.v2.1
NI.Sound.and.Vibration.Measurement.Suite.2011
NI.Spectral.MeasureMents. Toolkit.v2.1
NI.Switch.Executive.v3.0
NI.Teststand.v4.1.1

NI.VI.Logger.v2.0.1
NI-VISA.v3.4.1
NI.Vision.2011.09.Acquisition.Software
NI.Vision.v8.6.4.Run.Time.Engine
NI.Vision.Builder.AI.v3.6
NI.Vision Builder For Automated Inspectuon V2.6.1
NI.Vision.2011.Development.Module
NI.Vision.2011.Development.Module Run-Time
NI.Vision.Builder.for.Automated.Inspection.v2.6.1
 
If you need it or anyelse, please email to: crdlink@hotmail.com

13
Chat / FORA.FORM.3D.TOOLS.v3.52.CONFIGURA.v5.00
« on: April 04, 2013, 06:44:48 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


NI.LabVIEW.v8.6.1.PID.Control.Toolkit
NI.LabVIEW.v8.5.1.PDA.Module
NI.LabVIEW.2011.Real.Time.Module
NI.LabVIEW.2011.Report.Generation.Toolkit.for.Microsoft.Office
NI.LabVIEW.2011.Robotics Module
NI LabVIEW 2011 Run-Time Engine (Standard RTE) Win32
NI LabVIEW 2011 Run-Time Engine (Standard RTE) Win64
NI LabVIEW 2011 Run-Time Engine (Web Browser Plug-in) Win32
NI LabVIEW 2011 Run-Time Engine (Web Browser Plug-in) Win64
NI.LabVIEW.2009.v9.0.Simulation.Interface.Toolkit
NI.LabVIEW.2009.v9.0.SoftMotion.Module
NI LabVIEW 2009 v9.0 System Identification Toolkit
NI.LabVIEW.2011.Statechart.Module
NI.LabVIEW.2011.Touch.Panel.Module
NI.LabVIEW.2009.v9.0.Unit.Test.Framework.Toolkit
NI.LabVIEW.2011.VI.Analyzer.Toolkit
NI LabVIEW C Generator 2010
NI.LabView.with.Embedded.Support.v8.5
NI.LabVIEW.Signal.Express.v2.5.1
NI.LabVIEW.SignalExpress.v3.0
NI.Sound.and.Vibration.Toolkit.v6.0
LabelView.Network.Gold.v8.10.01.Multilingual
LabView v7.1 Real-Time Module v1.2 Win32.&.MAC.OSX
LabView.Embedded.Edition.v7.1.1
Measurement Studio Enterprise v8.6
 
If you need it or anyelse, please email to: crdlink@hotmail.com

14
Chat / Folio.Views+Builder.4.1.Multilingual
« on: April 04, 2013, 06:35:40 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


NI.IMAQ.v3.1
NI.INAQ.v2.0.1.for.NI.Vision.Builder.v2.6.1
NI-IMAQ.for.IEEE.1394.v2.0.1
DASYLab.v11.0.Bilingual
IMAQ Vision V7.1 for LabView 7.1

National.Instruments.Diadem.v9.0
National.Instruments.Matrixx.v7.1

Native.Instruments.Labview.v7.1.Professional.Development.System

DEWESoft
DEWESoft v6.60 Full

ECHELON
LonMaker Integration Tool v3.1 SP1

ABB
Abb.RobotStudio.v5.07.01
Abb Virtual IrC5 v5.07
ABB.Robotstudio.for.IRC5.v5.06
Abb PickMaster v3.11 CD
Abb ProgramMaker v4.3
Abb QuickTeach v5.3
ABB.Shoplooreditor.v2.5
Abb WebWare SDK v4.632
Abb WebWare Client v4.5
Abb WebWare Server v4.5
ABB WebWare Server v4.5 Manual Addon

KUKA Automatisering
KUKA Sim Pro v1.1

KeepITEasy
KeepITEasy.Flowol.v2.90
KeepITEasy.Flowol.v2.90.Control.Picture.Mimics
KeepITEasy.Flowol.v2.90.Fischertechnik.Mimics
KeepITEasy.Flowol.v2.90.More.Primary.Mimics
KeepITEasy.Flowol.v2.90.More.Secondary.Mimics
KeepITEasy.Flowol.v2.90.More.Secondary.Mimics.2
 
If you need it or anyelse, please email to: crdlink@hotmail.com

15
Chat / Folio.Builder.v4.2.2
« on: April 04, 2013, 06:22:41 am »
As the subject, the software is full ****, no limited and forever to be used.

    If you need it, please email to: crdlink@hotmail.com

    And we also have many other softwares, for example:


Phoenixcontact
AutoMationworx.Software.Suite.v2004.25.Multilingual

Siemens
Siemens.Plant.Simulation.v8.2.MultiLanguage
Simatic.Step7.Professional.Edition.2006.SR4.MultiLanguage.DVD
 
Siemens.Step.7.Microwin.v4.0.SP9
Siemens SIMATIC PCS 7 v7.0 SP2
Siemens.SIMATIC.S7.GRAPH.v5.3.SP6.Multilanguage
Siemens.SIMATIC.S7.PLCSIM.v5.4.SP3.Multilanguage
Siemens.SIMATIC.S7.SCL.v5.3.SP5.Multilanguage
Siemens.Simatic.PDM.v6.0.SP5.MultiLanguage
Siemens.Simatic.PDM.v6.0.SP4.Catalog.Addon.Multilanguage
Siemens.Simatic.PDM.v6.0.SP4.Manual.Addon.Multilanguage
Siemens Simatic WinAC v4.1
S7.200.PC.Access.v1.0.2.26.Multilanguage

Siemens.Digsi.v4.83
SIEMENS Drive ES Basic v5.4 SP2 and Drive ES Simatic v5.4 SP1
Siemens.Logosoft.Comfort.v5.0.19
Siemens.Logosoft.Comfort.v5.0.19.Manual.Addon

Siemens.Sinutrain.v6.3.MultiLanguage
Siemens.Simatic.WinCC.v7.0.SP1.MultiLanguage
Siemens Simatic WinCC v7.0 SP3 Update
Siemens.Simatic.WinCC.Web.Navigator.v6.2.SP2.Multilanguage
Siemens.SIMATIC.WinCC.Flexible.v2008.SP3
Siemens Simatic TIA Step7 Pro v11.0
Siemens.Softstarter.ES.2007.SP1.Multilanguage
 
If you need it or anyelse, please email to: crdlink@hotmail.com

Pages: [1] 2 3 ... 106